| Type: | Insulated |
|---|---|
| Conductor Type: | Stranded |
| Application: | Medical |
|
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ITEM | A: 3Coax×30AWG | B:1P×28AWG | C: 4C×28AWG | ||
| CONDUCTOR | Material | Tinned copper stranded | |||
| Size | 7/0.10±0.008mm | 7/0.127±0.008mm | 7/0.127±0.008mm | ||
| O.D.(Ref) | 0.30mm | 0.38mm | 0.38mm | ||
| INSULATION | Material | Foam PE | HDPE | HDPE | |
| Min.average thickness | 0.45mm | 0.15mm | 0.15mm | ||
| Min.thickness at any point | 0.35mm | 0.10mm | 0.10mm | ||
| O.D. | 1.35±0.08mm | 0.70±0.05mm | 0.70±0.05mm | ||
| TWISTED | O.D.(Ref) | / | 1.40mm | / | |
| SPIRAL | Material | Tinned copper | / | / | |
| Size | 45±3/0.10mm(90%) | / | / | ||
| INNER JACKET | Material | PVC | / | / | |
| Average thickness | 0.20mm | / | / | ||
| O.D. | 2.00±0.10mm | / | / | ||
| CABLING | Lay direction | S | |||
| Material | Al-mylar(face out) 125% | ||||
| BRAID | Material | Tinned copper | |||
| Size | 16/9/0.12mm(85%) | ||||
| JACKET | Material | PVC | |||
| Min.average thickness | 1.00mm | ||||
| Min.thickness at any point | 0.80mm | ||||
| O.D. | 8.00±0.20mm | ||||
| ELECTRICAL CHARACTERISTICS | PHYSICAL PROPERTIES | ||||
| Rated voltage:30V | Tensile strength: | ≥10.3MPa | |||
| Rated temperature:80ºC | Elongation: | ≥100% | |||
| Max. DC conductor resistance(20ºC): | Aged condition: | 113±1ºC×168h | |||
| A: 376.9Ω/km B,C:237.2Ω/km | Percent of original tensile strength: | ≥70% | |||
| Voltage withstand test:AC 0.5kV/1min | Percent of original elongation: | ≥65% | |||
| Insulation resistant:100MΩ.km | |||||
| Impedance :75±5Ω | |||||
ShippingFAQ
){kind=link}