Type: | Insulated |
---|---|
Conductor Type: | Stranded |
Application: | Overhead |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Construction | Mechanical Performance | ||||||||||
Insulation | Jacket | ||||||||||
Conductor | Tinned copper | Material | XLPE | XLPE | |||||||
Cross section | 16AWG | Tensile strength | ≥10.3MPa | ≥10.3MPa | |||||||
Construction | 26/0.254 | Elongation | ≥150% | ≥150% | |||||||
Strand Dia. | 1.49mm(REF) | Aged condition | 121±1ºC×168H | 121±1ºC×168H | |||||||
Insulation | XLPE | Percent of original tensile strength | ≥70% | ≥70% | |||||||
Nom.Thickness | 0.76mm | Percent of original elongation | ≥70% | ≥70% | |||||||
Min.Thickness | 0.69mm | Cold Bend(-40±1ºCX4hrs) | NO Crack | ||||||||
Insulation Dia. | 3.10±0.20mm | Flame Test | FT4 | ||||||||
Insulation colour | 1.black 2.blue 3.red 4.green 5.white 6.orange 7.white/black 8.red/black 9.green/black |
Oil Resistant Condition(IRM 902) | 100ºC×96hrs | ||||||||
Filler | Optional | Tensile strength | ≥50% of original | ||||||||
Drain wire | Tinned copper 32/0.20mm | Elongation(%) | ≥50% of original | ||||||||
Assembly | AL mylar(Overlap≥25%) | UV resistance test | 720Hrs | ||||||||
Jacket | XLPE | Tensile strength | ≥80% of original | ||||||||
Nom.Thickness | 1.14mm | Elongation(%) | ≥80% of original | ||||||||
Min.Thickness | 0.91mm | ||||||||||
Outer Dia. | 14.20±0.40mm |